HydroHub flame markHydroHub™by YBG Group InternationalIndustrial Advanced Technology Partner

Following COP31 · Antalya 2026

Lower emissions intensity from the fleet you already have.

COP31 was billed as the implementation COP. While coal plants keep running through the transition, the fastest emissions cut is inside the boilers already operating. HydroHub™ oxyhydrogen combustion enhancement helps the main fuel burn more completely, on the units you already have.

Read: Thirty years of pledges →
COP31 graphic: a HydroHub™ oxyhydrogen unit feeding hydrogen and oxygen into the flame of a coal-fired boiler, with the headline 'Lower emissions intensity from the fleet you already have.'

The transition period

Why the existing fleet matters now.

The fleet isn't closing this decade

Existing coal units will run for years, so every point of Heat-Rate Uplift is emissions avoided now, not in 2040.

Better combustion, not a fuel switch

Oxyhydrogen improves how the main fuel burns. There's no new fuel supply chain and no change to the main fuel system.

No new build required

A Combustion-Adjacent Intervention on units already running, with no change to the main fuel system.

Sources on COP31: Climate Home News: Fossil fuel expansion threatens COP31 hosts' credibility · Emerging Europe: Türkiye's energy mix

Verified results

What has been measured so far.

Field result

13% average steam-to-fuel ratio improvement across ten biomass-fired plants in seven Indian states, measured by YBG with client teams.

YBG's industrial oxyhydrogen work is referenced in a joint UIBC / Nangia Andersen report.

NOx reduction of 60% was measured at instrumented stacks.

The client reports ₹7.6 Cr average annual fuel savings and payback under two years at all ten sites. (client-reported)

These results come from biomass-fired process-steam plants, not from utility coal units.

Coal-fired utility boiler: pre-installation (engineering workflow). No result is claimed. No vendor, YBG included, currently operates an integrated system above 100 TPH equivalent capacity.

Full evidence →

HydroHub™

How oxyhydrogen improves combustion

  1. 01

    Hydrogen's fast flame speed and wide flammability range steady and speed up combustion in the flame zone.

  2. 02

    The oxygen arrives with the hydrogen, right where combustion happens.

  3. 03

    The result is more complete burnout of the main fuel.

Every installation is specified per unit and measured before and after with ControlAlign™.

HydroHub™ →

Request

Request a HydroHub™ proposal for your unit

Tell us about your unit and we'll come back with a proposal.

Or email info@ybgindustrial.com